Operation Cycle

• Pre-set temperature inside the dwelling is reached
• MVHR increased speed to cooler boost
• Once achieved the cooler will start
• Pre-set tempered internal temperature reached
• Cooler will deactivate
• MVHR decreased to continuous levels

Additional Controls

• Optional manual mode via the onboard aura-t™
• Minimum atmosphere temperature controls to ensure the cooler doesn’t operate with the dwelling heating system
• Cooler can be deactivated via the thermostat and/or onboard aura-t™

How

• Thermostat in Cooling Mode
• MVHR atmospheric temperature sensing
• Sufficient airflow for cooling operation automatically set by our controls
• Internal pressure sensors ensure cooler operates only when sufficient airflow is maintained
• Active communication between MVHR and Cooler

Technical Information

HRV Cool Q Plus™ –
TP755 – Vertical Wall Unit
TP754 – Floor mounted version
(left hand config only)

Filters: ISO Coarse 85% (G4) filters fitted as standard.

Pack requirements

• Cooler enabled HRV Q Plus MVHR
• HRV Cool Plus™ cooler
• Connection silencer ducts x 4
• Room Thermostat
• Wall mounting bracket or Floor standing bracket
• Middle duct cover

Accessories

• Cooler top duct cover
• HRV Drain Cover

Please note that the room thermostat will be in the packing for the HRV MVHR and that the ‘Duct cover’ will be part of the mounting kits.

Standards

Conforms to requirements of UK statutory Building Regulations and Technical Standards for Ventilation and BRE 398.
Meets requirements of Building Regulations Approved Document O (England & Wales).

EU RoHS Directive compliant.

Conforms to requirements of EC council directives relating to Electromagnetic Compatibility and Electrical Safety:
2006/95/EC (LVD), 2004/108/EC (EMC)
EN 60335-1:2002/A2:2006, EN 60335-2- 80:2003/A1:2004.
CE and UKCA marked.

Specification

Wall mounted – 704mm wide x 515mm deep x 1430 high (excluding ports).  Weight 100 kg
Floor mounted – 704mm wide x 515mm deep x 2005 high (excluding ports). Weight 106 kg

Weight: Wall mounted 100 kg, Floor mounted 106 kg.
Finish: White Paint (RAL9016 Semi-gloss Traffic White)

Materials:
Housing: Zintec sheet steel housing, powder coated white
Internals: Expanded polypropylene (EPP)
Heat exchanger: Made from high quality PET materials
Internal insulation: Closed cell foamed Nitrile rubber, class ‘O’ fire rating
Standard filters: Grade ISO Coarse 85% (G4) synthetic filters.

Electrical:
HRV Unit: 230V ~ 50/60Hz, 5A fuse
Cooler: 230V ~ 50/60Hz, 8A fuse

Installation: To be installed accordance with the relevant and applicable building regulations.

Maintenance: Service and filter clean/replacement subject to local environment – see product manual.

Acoustics: Full acoustic data available online www.titon.com/acoustics.

Air Performance

Preliminary Tempering Performance

db 32 wb 23.7 – External Air Temperature

db 34 wb 25.3 – External Air Temperature

The combined total kW cooling accounted for coolth recovery, sensible and latent cooling. These results therefore reflect expected cooling power and supply air temperatures when in operation. For cooling output data based on your assumed external design conditions, please consult Titon.

Wall Mounted - Drawing & Dimensions

Floor Mounted - Drawing & Dimensions